Here are brief explanations of the common issues that can be seen on your home’s roofing that you need to pay attention to and repair as soon as possible: 


Loss of granules 

Typical asphalt shingles have tiny granules that keep roofs from the environment and absorb UV radiation. Once the granules start to fall off, then your roof’s integrity starts to get weak. Try to inspect your roof and search for any signs of bald spots when you begin to have issues.  

Splitting 

Once the weather begins to warm up, tiles and shingles expand. When there’s insufficient room on your roof, then shingles and tiles could run into each other, which will cause them to bend and split. When you’ve recently hard your new roof installed, check the shingling and tiling structure. As the materials used for your roof must be packed together tightly, there must be a bit of room to allow them to move every time they are subjected to the weather.   

Shrinking 

Once the weather becomes colder, your whole house will naturally contract—including your tiles and shingles. When your roof hasn’t been ready for shrinking, then tiles and shingles can fall and break off, making more issues to resolve at the end of the day. 

Bad repairs 

While quick construction or a patch repair may provide a temporary solution, you still have to search for a repair that gives a long-term solution so that you can prevent issues in the future. Rather than settling for patches, it would be best if you perform a small roof replacement and ensure any loose tiles or shingles are fit into the roof itself properly. A replacement can help repair the roof’s hole and the potentially vulnerable shingles found surrounding the hole.  

Holes in roof 

Debris from high winds can make holes in your roofing. Open holes not only allow wind and rain to get inside but also small animals and insects. Moreover, the cooling and heating bill of your house can drastically increase because of heater or air conditioner leaks. Repair and identify holes right away should you notice them.  

Standing water 

When your roof has a divot that enables water to pool, then moisture will most likely get absorbed over time, causing leaks in particular parts of your home. Metal flashing and quality gutters and allow water to properly flow, keeping it from pooling.   

Lifted shingles 

High winds and extreme weather can lift shingles, tiles, and metal flashing up. Lifted shingles should be nailed down and resealed back onto your home’s roofing. The longer a piece of roofing stays lifted, the more the issue you’ll be facing can get even worse.  

Leaking roofs 

Even the sturdiest shingles may result in leaks and some issues in your house. Once moisture penetrates your roof, it can potentially make leaking into your home, which makes mildew and mold and rot your home.  

Once you can observe any of these issues, we highly recommend you contact the experts from your local roofing company Pasadena as soon as possible and get your roof checked.